Jonesboro Electrical Company handles electrical repair and installation for homes and businesses across Jonesboro and Clayton County. Whether you are dealing with a tripped breaker at midnight, planning a panel upgrade before a renovation, or adding circuits for a growing commercial space, we cover the full range of residential and commercial electrical work. We are available 24 hours a day, 7 days a week, including nights, weekends, and holidays. Schedule it. We wire it. You're powered.
Call (943) 236-6289 for a quote.
You get straight answers about your panel and wiring before anything is scheduled.
Staying ahead of electrical problems keeps your home safe. Flickering lights, dead outlets, breakers that trip repeatedly, and partial power loss are all symptoms worth taking seriously. They point to something happening in the wiring or at the panel, and the sooner it gets looked at, the less likely it is to become a larger problem.
A diagnostic visit starts at the panel. We check the breakers, trace the affected circuit, and identify the fault before any work begins. That means you know what the problem is and what it takes to fix it before we start. GFCI and AFCI protection falls into this scope as well. Kitchens, bathrooms, garages, and exterior outlets all require ground-fault protection, and arc-fault breakers are now standard in bedrooms and living areas. If yours are missing or failing, we handle the replacement as part of the same visit.
Dead outlets usually have a simple cause worth finding.
A breaker panel that is undersized, aging, or simply worn out creates real problems for a home or building. We handle breaker replacement, full panel swaps, and 200-amp service upgrades for properties that need more capacity. Service-entrance work, meter-base upgrades, and the coordination that goes into a utility-side change are all part of that scope.
Older homes in Clayton County sometimes still carry knob-and-tube wiring or aluminum branch circuits. Both create load and safety concerns that a modern panel alone cannot fix. We handle whole-home rewiring, knob-and-tube replacement, and aluminum wiring remediation to bring the full system up to current standards.
Dedicated appliance circuits are another common request. Dryers, refrigerators, dishwashers, and large kitchen or laundry loads each need their own circuit to run safely and efficiently. We run load calculations to confirm the panel can carry what the home demands before we add anything to it. Electrical work done to the standard the next inspection expects is how we approach every panel job.
A breaker that keeps tripping is a warning worth heeding.
What sets this service apart is straightforward: most of these jobs are faster than homeowners expect, and the difference in function and appearance is immediate.
Outlet installation and replacement covers standard receptacles, GFCI outlets for kitchens, bathrooms, garages, and exterior locations, and USB outlets where a customer wants them. Switch work ranges from a single standard replacement to dimmer installation and multi-switch configurations.
Lighting covers a wide range of work. Interior jobs include recessed lighting, ceiling light installation, and under-cabinet lighting for kitchens. Exterior and security lighting, landscape lighting, and motion-sensor fixtures are all common requests. Ceiling fan installation, replacement, and the wiring that supports it round out this section. If a fan is going in where there was no fixture before, we handle the box, the wiring run, and the switch as part of the same job.
One call gets the problem looked at properly.
Georgia's four-season climate puts real demand on a home's electrical system. Heating and cooling loads push panels hard, and the severe thunderstorms, tornadoes, and occasional ice storms that move through this region make backup power and surge protection genuinely worthwhile investments for Jonesboro-area homeowners.
Older homes throughout the Jonesboro area were built when electrical loads were a fraction of what modern households demand. A 100-amp panel that once served a home comfortably may struggle to handle central air, an EV charger, a home office, and a full appliance load at once. A 200-amp upgrade gives the system the headroom it needs. The visit covers a load assessment, confirmation of the service-entrance capacity, and the panel work itself. We confirm what the home needs before the job is scoped.
Storm season in Georgia is active. Thunderstorms and tornadoes can knock out power for hours or days, and ice storms in winter add another layer of risk. A backup generator connected properly to the home's panel through a transfer switch keeps critical circuits running when the grid goes down. We handle the transfer switch installation, the dedicated circuit, and the panel-side work that makes the hookup safe and code-ready. The transfer switch is what prevents back-feed onto the utility lines, and it is required for any permanent generator connection.
Summer lightning in Clayton County is frequent, and grid fluctuations during high-demand periods add wear to sensitive electronics over time. A whole-house surge protector installed at the panel intercepts voltage spikes before they reach the wiring in the home. It is not a power strip. It protects every circuit in the house at once, including the appliances, the HVAC power supply, and anything plugged into any outlet. Installation is straightforward and the protection it provides covers equipment that a single power strip never reaches.
Getting your electrical problem handled starts with a quick call. That applies to EV charger installation as much as it does to a tripped breaker. A Level 2 home charger runs on a 240-volt dedicated circuit, and the first step is confirming the panel has the capacity to support it. An EV charger or a hot tub often means checking the panel first. If an upgrade is needed, we scope that alongside the charger installation so the whole job gets handled at once.
Dedicated circuits for dryers, refrigerators, freezers, and other high-draw appliances follow the same logic. Each appliance that pulls a heavy load needs its own circuit to run without nuisance tripping or heat buildup in the wiring.
Electrical safety inspections are the right call for older homes, properties changing hands, and buildings that have gone through a renovation. We check the panel, the branch circuits, the grounding, the outlets, and the visible wiring for anything that falls short of current standards. Hard-wired smoke detector installation is part of what we handle during inspection follow-up when detectors are missing or outdated.
Reach out and we'll start at the panel.
Office buildings, retail spaces, and light commercial properties in Jonesboro need electrical work handled with the same care and attention to detail as any residential job. We handle commercial electrical repair, panel work, outlet and circuit installation, and lighting upgrades for businesses across Clayton County.
Renovation and remodel electrical, new-construction wiring, and electrical work for building additions are all part of our commercial scope. We treat the wiring in your building the way we would our own, which means the work is scoped clearly, priced on the call, and done to the standard a commercial inspection requires.
Scheduling a commercial job starts the same way a residential call does. You describe what the project involves, we ask the right questions, and you get a price before anything is confirmed.
Keeping a home safe starts with the wiring behind the walls, and knowing what the work costs before you commit is part of making a good decision. When you call about a panel upgrade, an EV charger circuit, a new outlet, or any other job, you get the price on the phone before anything is scheduled. The scope and the cost are explained clearly so you know what you are agreeing to.
Common questions we hear: what does a panel upgrade cost, what does EV charger installation run, how much to add a circuit or replace an outlet. The honest answer is that the price depends on what the job involves, and the only way to give you a real number is to understand the specifics. That is what the call is for.
We are available at any hour, any day of the week. There is no after-hours rate structure to navigate and no need to wait until Monday.
We handle residential and commercial electrical work throughout Jonesboro and the communities around it. That includes Morrow, Riverdale, Forest Park, Lovejoy, Hampton, and Stockbridge. If your property sits in Clayton County or just across its borders, call and we will confirm coverage for your address.
Every type of property is in scope: single-family homes, rental properties, multi-unit buildings, retail spaces, and offices. Landlords and property managers working across multiple addresses are welcome to call with questions about scheduling multiple jobs.
Call (943) 236-6289 and describe what you are dealing with: the symptom, where it is happening in the home or building, and anything you already know about the wiring.
We ask the right questions on the call and give you a price before anything is scheduled. The scope is confirmed before the job is booked, so you know what you are agreeing to.
Do not use the outlet or switch, and do not try to reset the breaker if the panel is making noise or feels warm.
Call us at (943) 236-6289 immediately.
We take calls at any hour, any day of the week, and a sparking outlet or a buzzing panel is exactly the kind of problem that should not wait until morning.
A breaker that trips repeatedly is telling you something is wrong on that circuit, and resetting it without finding the cause does not fix the underlying problem. Continued resets can stress the wiring and the breaker itself. Call us and we will trace the circuit, identify the fault, and tell you what the repair involves before any work begins.
Partial power loss, where some circuits are dead but others are working, usually points to a problem at the panel or at the service entrance. Check whether the main breaker has tripped, but do not assume a reset will hold. Call us so we can assess what is happening at the panel level and confirm whether the issue is inside the home or involves the utility connection.
Yes. We handle residential and commercial electrical work across Jonesboro and Clayton County. That includes single-family homes, rental properties, multi-unit buildings, retail spaces, and office buildings. The process is the same regardless of property type: you call, we scope the job, and you get a price before anything is scheduled.
The price we give on the call reflects what the job involves based on what you describe. If the scope is clear from the conversation, the rate is confirmed before the visit. If the job requires a site assessment to scope accurately, we explain that up front so there is nothing unclear when work begins.
We are available 24 hours a day, 7 days a week, including Saturdays, Sundays, and every holiday. There are no after-hours restrictions because there are no after-hours. If the problem is happening now, call now.
We serve Jonesboro as our base and cover Clayton County broadly, including Morrow, Riverdale, Forest Park, Lovejoy, Rex, Hampton, and surrounding communities. We also take calls from McDonough and College Park. If you are unsure whether your address falls in our service area, call and we will confirm it.
It depends on the job. Some repairs and outlet replacements can be handled with only the affected circuit de-energized. Panel work and service upgrades require the main power to be off for part of the visit. We explain exactly what will be shut down and for how long before the work begins, so you can plan accordingly.
Clear access to the panel and the area where the work is happening. If the job involves an attic, crawl space, or utility room, make sure the path is accessible. Beyond that, you do not need to prepare anything specific. We handle the rest from the point of arrival.
Jonesboro Electrical Company is available around the clock, any day of the year. Nights, weekends, and holidays included. Whether the job is urgent or planned, the process starts the same way: you call, you get a real answer about what the work involves and what it costs, and you decide how to move forward from there.
Pick up the phone. Get a straight answer. That is how we work.
Call (943) 236-6289 for a quote.
Every electrical job we take on in Jonesboro starts the same way: you call, describe what is happening, and we give you a straight answer about what the work involves and what it will cost before anything is scheduled. The table below covers the services we handle most often for homeowners, businesses, landlords, and property managers across Clayton County. Use it to find what fits your situation, then call and we will scope the job from there.
| Service | What the Job Involves | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Repairs and Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Circuit faults traced to the source, Loose connections and failing components | Any home or business with a symptom that needs a cause, not just a reset | A diagnostic visit covers the root cause, not just the visible symptom. Tracing the fault before replacing parts saves time and avoids repeat calls. |
| Backup Generator Installation | Transfer switch installation at the panel, Dedicated generator circuit, Back-feed prevention wiring, Panel integration for critical circuits | Clayton County homeowners who want power for critical circuits when Georgia storms take out the grid | The transfer switch is the critical component. It isolates the home from the utility line during an outage, protecting both the equipment and anyone working on the line outside. We handle the electrical side. The generator unit itself is sourced separately. |
| Dedicated Appliance Circuits | 240-volt circuits for dryers and ranges, Circuits for washers and refrigerators, Workshop and garage circuits, Properly sized breakers for each load | Homeowners adding a major appliance or a workshop that needs its own circuit rather than sharing one | A dryer or electric range needs a 240-volt circuit sized for its draw. Running one is not the same job as adding a standard outlet, and we scope it correctly from the start. |
| Electrical Panel and Service Upgrades | 200-amp service upgrades, Subpanel additions, Load calculations before the work starts, Service entrance and meter coordination | Homes with older 100-amp panels, properties adding major loads like EV chargers or generators, and buildings expanding operations | A panel upgrade in Clayton County typically involves a permit and inspection. We handle the scope and load calculation up front so the upgrade is sized for what the home actually needs, not just the minimum. |
| Outlet and Switch Installation | GFCI outlet installation, Standard and USB outlet replacement, Dimmer and smart switch upgrades, AFCI breaker installation | Homeowners adding outlets, updating older devices, or bringing wet-location protection up to code | GFCI protection is required at kitchens, bathrooms, garages, and exterior locations. Older homes that lack it can usually be brought up to standard without a full rewire. |
| Electrical Safety Inspections | Panel and branch circuit assessment, Grounding and bonding check, Outlet and wiring condition review, Documentation of findings | Older homes, properties changing hands, landlords preparing a unit, and homeowners adding a major new load | An inspection before adding an EV charger or generator hookup tells you whether the panel has the capacity or whether an upgrade needs to come first. We document what we find so you have a clear picture before any work is committed. |
| Lighting Installation | Recessed LED retrofits and new runs, Exterior and security lighting, Under-cabinet and accent lighting, Commercial fixture and track lighting | Residential and commercial properties adding, replacing, or upgrading interior or exterior lighting | New recessed lighting in a room that has never had it requires running circuits, not just swapping fixtures. We scope what the ceiling and panel can support before the work starts. |
| Breaker and Fuse Repair | Breakers that trip repeatedly, Breakers that will not reset, Fuse panel assessment, Faulty breaker replacement | Homes and businesses where a breaker is misbehaving or a fuse panel is overdue for attention | A breaker that trips under normal load is pointing at something. We find out whether the issue is the breaker itself, the circuit, or the load before recommending a fix. |
| Older-Home Rewiring | Knob-and-tube wiring replacement, Aluminum branch circuit assessment and remediation, Cloth-sheathed cable replacement, Whole-home or partial rewire scoping | Owners of older Jonesboro homes where the wiring type or condition makes targeted repairs insufficient | Knob-and-tube and aluminum branch circuit wiring carry risks that a patch cannot fully address. We assess what is in place and explain the options before recommending a scope, so the decision is based on what is actually there. |
| Whole-Home Surge Protection | Panel-mounted surge protector installation, Protection against lightning-induced spikes, Coordination with outlet-level strip protection, Assessment of existing surge protection | Jonesboro and Clayton County homes exposed to frequent summer lightning activity | A panel-level surge protector handles the large transient events that outlet strips are not rated to absorb. One nearby lightning strike can reach every circuit in the house through the service entrance. |
| Ceiling Fan Installation | Fan-rated box installation, New wiring for switched or remote setups, Replacement of existing fans, Load check on the circuit | Homeowners adding or replacing ceiling fans, especially where no fan box currently exists | A ceiling fan requires a fan-rated box rated for the weight and motion. A standard light fixture box is not rated for it, and we confirm the right box is in place before the fan goes up. |
| Wiring and Circuit Installation | New circuit runs throughout the home, Rewiring for renovations and additions, Circuit capacity for expanded loads, Wiring to current code standards | Homeowners finishing a basement, adding a room, or expanding a commercial space that needs new circuits | Wiring for an addition has to match the panel capacity and the code in effect at the time of the permit. We confirm both before the first wire is pulled. |
Call (943) 236-6289 and we will walk through what your electrical job involves, give you a price, and get it on the schedule.
(943) 236-6289