When something goes wrong with the wiring in a Union City home or building, the first question is usually simple: who can come out, and how soon. We handle the full range of residential and commercial electrical work in Union City and across Fulton County, and we are available at any hour, any day of the week, including weekends and holidays. Whether it is a panel that needs replacing, a circuit that will not hold, or a single outlet that stopped working, the call starts the same way: you describe what is happening, and we tell you what the work involves and what it costs before anything is scheduled.
Union City is a city with a real mix of housing, from older homes on wiring that has never been touched to newer construction with modern panels and growing load demands. Businesses, rental properties, and owner-occupied homes all have different needs, and we work across all of them.
Call (943) 236-6289 and get straight answers about your panel and wiring before anything is confirmed.
When a previous repair or installation was done incorrectly, the question is not always whether it needs to come out. Sometimes it does. Sometimes the wiring behind it is fine and only the connection point needs attention. We look at what is actually there before deciding, and we explain the difference on the call and again at the panel.
Older homes in particular tend to carry a history of additions: a circuit run for a window unit, an outlet added in a garage, a subpanel that was installed without a load calculation to back it up. None of that is automatically wrong. What matters is whether the work is safe, whether it is sized correctly for what it feeds, and whether it meets the standard a current inspection would expect. We treat your home and its wiring the way we would our own, which means we are not looking for reasons to replace things that do not need replacing.
Where something does need to come out, we say so plainly and explain why. A connection that creates heat, a circuit that is undersized for its load, or a panel with breakers that have been doubled up without the capacity to support them are not judgment calls. They are problems with a clear fix, and we describe the fix before we start.
What you get at the end of an electrical job is not just a finished circuit. Every breaker in a panel should be labeled accurately, every new circuit documented, and every connection verified under load before we leave. That matters on any job, and it matters more when a property is going to be sold, rented, or inspected.
A panel with unlabeled breakers is a problem for the next electrician, the next inspector, and the next tenant. We label clearly and accurately, which means the label reflects what the circuit actually feeds, not what someone guessed when the panel was last opened. When a job involves multiple circuits or a panel upgrade, we document what was done so there is a clear record.
For rental properties in Union City, that documentation matters between tenants. A landlord who can show that the panel was assessed, circuits were verified, and GFCI protection is in place at the right locations is in a better position when a tenant moves in or an inspection comes up. We treat the finished job as something that has to hold up to scrutiny, because it does.
Staying ahead of electrical problems keeps your home safe. The jobs below come up regularly in a city this size, across the mix of housing and commercial property that Union City carries. Each one starts with a situation, not a catalog entry.
A home that was built with 100-amp service and has since added central air, a home office, a washer and dryer, and now needs an EV charger is not a home that can keep adding loads without a reckoning at the panel. A service upgrade to 200-amp capacity involves the panel itself, the service entrance, and in some cases coordination with the utility for the meter side of the work. We run load calculations before the work starts so the upgrade is sized for what the home actually demands, not just for what it had yesterday.
A dead outlet is sometimes a tripped GFCI upstream from it. Sometimes it is a loose connection at the terminal. Sometimes the outlet itself has failed. We find the cause rather than replacing parts until something works. New outlet installation, GFCI protection in kitchens, bathrooms, garages, and exterior locations, and switch upgrades including dimmers and multi-switch configurations all fall within a single visit. One call gets the problem looked at properly.
Low-voltage work covers the wiring behind a video doorbell, the data runs for a home office or a commercial space, and the rough-in for security or intercom systems. These jobs look simple from the outside and create real problems when they are done without attention to the electrical side: a video doorbell that draws from the wrong transformer, a data run that shares a path with a high-voltage circuit, or a rough-in that was never properly terminated. We handle the rough-in and the connection to the panel side correctly from the start.
Older homes in Union City sometimes still carry knob-and-tube wiring in the walls and attic. The wiring itself is not always the immediate danger, but it creates real limitations: it cannot be covered with insulation safely, it is not grounded, and it cannot support the loads a modern household puts on it. Replacing it is not a one-afternoon job. It involves opening walls, running new cable, and connecting to a panel that can carry the updated circuits. We assess what is in place and scope the work honestly before anything starts.
Getting your electrical problem handled starts with a quick call. We take appointments for planned work and we answer calls for problems that will not wait. There is no after-hours rate structure to navigate because there are no after-hours. We are available at any hour, including nights, weekends, and holidays.
For tenants and businesses that need to stay operational, we work around the situation. A retail space that cannot shut down for a full day, a rental unit with a tenant who has a schedule, a property manager coordinating access across multiple addresses: these are ordinary scheduling conversations, not complications. We confirm what is available when you call and work out the timing before anything is booked.
For urgent problems, including a panel that is making noise, an outlet that sparked, or a partial power loss that is affecting part of the home, call immediately. Describe what is happening and we assess how quickly it needs attention. A breaker that keeps tripping is a warning worth heeding, and waiting is not always the right answer.
The price for electrical work is determined by what the job actually involves. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the three things that move a quote. We give you the price on the call when the scope is clear enough to quote accurately. If the job needs a site visit to scope correctly, we say so up front.
Ask what it covers and you get a straight answer. There is no ambiguity about what is included and what is not, and the price is confirmed before the work begins.
Call (943) 236-6289 and describe what you are dealing with.
Most electrical work beyond a simple device replacement requires a permit, and that is true across Fulton County as a general matter. Panel upgrades, service entrance work, new circuit runs, and whole-home rewiring are the jobs most likely to require one. The permit triggers an inspection, and the inspection is what confirms the work was done correctly.
We handle the permit filing as part of the job when it is required. The timing matters: a permit filed before work starts is a job that can be inspected and closed out cleanly. A job done without one creates a problem when the property is sold or when an insurer asks for documentation. Electrical work done to the standard the next inspection expects is how we approach every permitted job. If you are unsure whether your project requires a permit, ask on the call and we will tell you what typically applies. Start with the electrical services page if you want the detail before the call.
We serve Union City and the communities around it throughout Fulton County and the surrounding area. Electrical work here gets handled by people who answer to this community, and that coverage extends to the neighbors.
Communities we cover include South Fulton, Fairburn, College Park, East Point, and Palmetto. If your property is in or near any of these areas, call and we will confirm coverage for your address. Rental properties, owner-occupied homes, and commercial buildings across this part of Fulton County are all in scope.
Older homes in Union City frequently have panels that were never upgraded from their original service capacity, outlets that lack GFCI protection in wet locations, and in some cases knob-and-tube wiring that has never been replaced. These are not always urgent failures, but they create real limitations on what the home can safely support and what an inspection will accept. A call is the right first step to understand what is actually in place and what, if anything, needs attention.
A hot tub requires a dedicated 240-volt circuit, a disconnect within sight of the unit, and GFCI protection. We handle the circuit, the disconnect, and the panel-side work. The hot tub itself is a separate matter handled by whoever supplies or installs the unit.
A fault that shows up in wet conditions and clears when things dry out usually points to moisture getting into a connection, a conduit, or a junction box. We look for entry points, check the weatherproofing on any outdoor or underground wiring involved, and address the moisture path rather than just the symptom.
Panel access is required before any electrical work can begin. If the panel is blocked on arrival, the visit cannot proceed until it is cleared. We recommend confirming that the panel is accessible before the scheduled visit to avoid losing the appointment window.
Most significant electrical work, including panel upgrades, new circuit runs, and service entrance changes, requires a permit in Fulton County. The permit leads to an inspection, which confirms the work meets current standards. We handle the permit filing when it is required as part of the job. If you are unsure whether your specific project needs one, ask on the call and we will tell you what typically applies so the job can be planned and closed out correctly.
We restore power to whatever circuits are safe to energize at the end of each day on a multi-day job. Circuits that are mid-work and not yet safe to energize stay off. We explain the situation clearly at the end of each visit.
Not always. If the service entrance is already rated for the capacity the home needs, only the panel itself may need to change. We assess both the panel and the service entrance during the same visit so the recommendation covers the whole picture.
Describing what you are seeing is enough. A light that flickers, a breaker that will not hold, a panel that sounds wrong, an outlet that stopped working: those descriptions are what the call is for. We ask the right questions and tell you what the work involves before anything is scheduled.
Pick up the phone. Get a straight answer. That is how we work.
Call (943) 236-6289. We are available around the clock, every day of the year.
Also serving the towns around: Fairburn, College Park, Riverdale.
Every electrical job we take on in Union City starts the same way: you call, describe what is happening, and we give you a straight answer about what the work involves and what it will cost before anything is scheduled. The table below covers the services we handle most often for homeowners, businesses, landlords, and property managers across Fulton County. Use it to find what fits your situation, then call and we will scope the job from there.
| Service | What the Job Involves | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Repairs and Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Circuit faults traced to the source, Loose connections and failing components | Any home or business with a symptom that needs a cause, not just a reset | A diagnostic visit covers the root cause, not just the visible symptom. Tracing the fault before replacing parts saves time and avoids repeat calls. |
| Backup Generator Installation | Transfer switch installation at the panel, Dedicated generator circuit, Back-feed prevention wiring, Panel integration for critical circuits | Fulton County homeowners who want power for critical circuits when Georgia storms take out the grid | The transfer switch is the critical component. It isolates the home from the utility line during an outage, protecting both the equipment and anyone working on the line outside. We handle the electrical side. The generator unit itself is sourced separately. |
| Electrical Panel and Service Upgrades | 200-amp service upgrades, Subpanel additions, Load calculations before the work starts, Service entrance and meter coordination | Homes with older 100-amp panels, properties adding major loads like EV chargers or generators, and buildings expanding operations | A panel upgrade in Fulton County typically involves a permit and inspection. We handle the scope and load calculation up front so the upgrade is sized for what the home actually needs, not just the minimum. |
Call (943) 236-6289 and we will walk through what your electrical job involves, give you a price, and get it on the schedule.
(943) 236-6289